how to assembly PC By Muhammad Luqman Hakim

how to assembly PC

Report :

The Assembly of Personal Computers

By

Muhammad Luqman Hakim

Class XII RPL 2

Number 26

SMK Negeri 4 Kendal

PREFACE

           

Praise to Allah SWT Due to the mercy and grace Him so Compilation report has been completed. This report is one of the requirements to Fulfill Duties english lessons of SMK N 4 Kendal.

By this report, I would like to thank to :

1.     1. Drs. Hero Sultoni Camara, as english teacher of SMK N 4 Kendal

2.    2. My parents, friends, classmates, and anyone who has helped me in doing and competing this report.

I belive that this report is still away form perfect, so I accept suggestin and constructive criticism form all readers. Finally, I hope that this report can be useful for all.

Kendal, 07^th Oct 2012

Writer                       

Muhammad Luqman Hakim

TABLE OF CONTENTS

Title page

Preface

Table of contents

I.            Introduction

II.          Contents

III.       Closing

CHAPTER I

INTRODUCTION

A.   A. The Background of The The Assembly of Personal Computers

Computers are tools used to process data in accordance with procedures that have been formulated. The word computer was originally used to describe people whose jobs do arithmetic calculations, with or without the tools, but the meaning of the word is then transferred to the machine itself. Origins, processing information almost exclusively related to arithmetical problems, but modern computers are used for many tasks unrelated to mathematics.

In the sense that there are tools such as slide rules, mechanical calculators types ranging from abacus and so on, until all contemporary electronic computers. The term better suited for a broad sense as "computer" is "that process information" or "information-processing system." Over the years there have been several different meanings in the word "computer", and a few different words is now called called a computer.

B.    B. How to get the data

in getting the data, I've been looking at a variety of:
1. Internet
2. Textbooks old class X and XI

CHAPTER II

CONTENTS

A.   A.Materials

1.     A computer

2.    CD driver

3.    Motherboard

4.    VGA card

5.    RAM memory

6.    Processor

B.    B.Equipment

1.     Pliers

2.    Screwdriver

3.    AVO meter (when there)

4.    Solder

5.    Tin solder

6.    Isolation

7.    Cable straps

8.    Guidebook

C.    C. Step

1.     Prepare the motherboard and place it in a safe place

2.    Install the processor in place (the socket) noticed a sign on the processor must be placed according to the markings on the connector (no reverse)

3.    Install the RAM memory in place properly, note Memory usually notched corner should be put in place carefully

4.    Insert the motherboard into cashing (in the computer), hooks plastic hooks used kanlah provided by the factory casing, into the hole located on the motherboard

5.    Install the power supply special cables for the motherboard power supply (usually written P8 and P9), black wires from both connectors must be mounted side by side

6.    Install a hard disk, floppy driver in the space available inside the CPU casing, tighten the bolt holder with carefully

7.    Connect the cable from the power supply to the power slot available on your hard disk, floppy drive and CD ROM drive

8.    Connect the ribbon cable (data cable) on the holder the hard disk, floppy drive and CD ROM drive

9.    Connect the cable from the floppy drive into the slot for a floppy drive, as well as connect the cable from the hard disk to the IDE slot number 1, and the cable from the CD ROM to the IDE slot number 2

10.  Install the VGA card in the slot, if you have a card of this type of ISA, you have to put the cards on the ISA bus slots on the motherboard

11.  Install the add-on VGA card expansion card

12.  Connect the cables connecting the "reset" to see "Reset" key on the motherboard

13.  Attach the data cable from the monitor to the card slot contained in VGA connectors have 3 rows noticed legs neatly arranged, with trapezoidal shaped connector

14.  Plug the keyboard into the keyboard slot located on the motherboard

15.  Last pair cables (power) from the monitor to the power slot located on the back of the power supply already installed on the CPU casing

CHAPTER III

CLOSING

A.   A. Conclusion

In the installation of all the components of the PC must be thorough and correct, if there is an error or a PC component teropasang not then it can affect the computer program or even a computer can not be turned on / use.

B.    B. Suggestion

In the installation, must be thorough, correct and to check first before the installation process (before the computer starts up).

At the time of installation should read the guide book and accompanied by a person who has had or could install and assemble a PC (for beginners).